Question

On heating 0.32 g of an organic compound with concentrated nitric acid and barium chloride, 0.932 g barium sulphate was obtained. Calculate the percentage of sulphur in the given compound.

Solution

Correct option is

40%

 

Mass of organic compound, W = 0.32 g

Mass of barium slphate, W1 = 0.932 g      

           

           233 g                32 g

Percentage of sulphur  

         

         

          = 40%.

SIMILAR QUESTIONS

Q1

0.156 g of an organic compound on heating with fuming HNO3 and AgNO3 gives 0.235 g of AgI. Calculate the percentage of the iodine in the compound.

Q2

0.92 g of an organic compound containing carbon, hydrogen and oxygen was analysed by combustion method. The increase in mass of the U-tube and the potash bulbs at the end of the operation was found to be 1.08 g and 1.76 g, respectively. Determine the percentage composition of the compound. 

Q3

276 g of silver carbonate on being strongly heated yields a residue weighing

Q4

An organic substance (0.2115 g) on complete combustion gave 0.4655 g of carbon dioxide and 0.2533 g of water. Determine the percentage composition of the compound.

Q5

An organic compound was analysed by Duma’s method. 0.45 g of the compound on combustion gave 48.6 ml nitrogen at 27oC and 756 mm pressure. Calculate the percentage of nitrogen.

Q6

An organic compound on analysis gave the data : 0.25 g of the compound on complete combustion gave 0.37 g of CO2 and 0.2 g of water.

Q7

0.2 g of an organic compound was analysed by Kjeldahl’s method. Ammonia evolved was absorbed in 60 ml N/5 H2SO4. Unused acid required 40 ml of N/10 NaOH for complete neutralisation. Find the percentage of nitrogen in the compound.

Q8

1.216 g of an organic compound was reacted under Kjeldahl’s method and ammonia evolved was absorbed in 100 ml N H2SO4. The remaining acid solution was made up to 500 ml by addition of water 20 ml of this dilute solution required 32 ml of N/10 caustic soda solution for complete neutralisation. Calculate the percentage of nitrogen in the compound. 

Q9

0.5264 g silver bromide is obtained from 0.5124 g of an organic compound. Calculate the percentage of bromine in the compound.

Q10

0.1170 g of an organic compound on heating with conc. HNO3 and silver nitrate in Carius furnace gave 0.42 g of AgCl. Find the percentage of chlorine in the compound.