A Piece Of Platinum Can Be Sealed Successfully Into Soda Glass But Not A Piece Of Copper Because:

Why Kaysons ?

Video lectures

Access over 500+ hours of video lectures 24*7, covering complete syllabus for JEE preparation.

Online Support

Practice over 30000+ questions starting from basic level to JEE advance level.

Live Doubt Clearing Session

Ask your doubts live everyday Join our live doubt clearing session conducted by our experts.

National Mock Tests

Give tests to analyze your progress and evaluate where you stand in terms of your JEE preparation.

Organized Learning

Proper planning to complete syllabus is the key to get a decent rank in JEE.

Test Series/Daily assignments

Give tests to analyze your progress and evaluate where you stand in terms of your JEE preparation.



A piece of platinum can be sealed successfully into soda glass but not a piece of copper because:


Correct option is

Platinum and soda glass have almost same coefficient of linear expansion

Platinum and soda glass have almost same values of  



Expansion during heating: 


Two rods of lengths L1 and L2 are made of materials whose coefficients of linear expansion are α1 and α2. If the difference between the two lengths is independent of temperature:  


When a strip made of iron (α1) and copper 2 > α1) is heated: 


An iron tyre is to be fitted onto a wooden wheel 1.0 m in diameter. The diameter of thetyre is 6 mm smaller than that of wheel. The tyre should be heated so that its temperature increases by a minimum of (coefficient of volume expansion of iron is 3.6× 10–5/oC):   


If the length of a cylinder on heating increases by 2%, the area of its base will increase by:


When a copper ball is heated, the largest percentage increase will occur in its: 


A rectangular block is heated from 0oC to 100oC. The percentage increase in its length is 0.10%. What will be the percentage increase in its volume?


A thick and a thin wire of same material and same length are heated from 10oC to 90oC. Which expands more?


Two rods of same material and length have their radii in ratio of 3:1, the ratio of expansion  when same amount of heat is supplied will be:


Liquid is filled in a flask up to a certain point. When the flask is heated, the level of liquid: