Liquid is filled in a flask up to a certain point. When the flask is heated, the level of liquid:
Initially falls and then rises
First the flask expands and hence the level first falls and then rises.
Two rods of lengths L1 and L2 are made of materials whose coefficients of linear expansion are α1 and α2. If the difference between the two lengths is independent of temperature:
When a strip made of iron (α1) and copper (α2 > α1) is heated:
An iron tyre is to be fitted onto a wooden wheel 1.0 m in diameter. The diameter of thetyre is 6 mm smaller than that of wheel. The tyre should be heated so that its temperature increases by a minimum of (coefficient of volume expansion of iron is 3.6× 10–5/oC):
If the length of a cylinder on heating increases by 2%, the area of its base will increase by:
When a copper ball is heated, the largest percentage increase will occur in its:
A rectangular block is heated from 0oC to 100oC. The percentage increase in its length is 0.10%. What will be the percentage increase in its volume?
A thick and a thin wire of same material and same length are heated from 10oC to 90oC. Which expands more?
Two rods of same material and length have their radii in ratio of 3:1, the ratio of expansion when same amount of heat is supplied will be:
A piece of platinum can be sealed successfully into soda glass but not a piece of copper because:
Coefficients of volume expansion of substances are generally in the range of: